Origin of superior dielectric and piezoelectric properties in 0.4Ba(Zr0.2Ti0.8)O3–0.6(Ba0.7Ca0.3)TiO3 at intermediate grain sizes

Grain size effect is one of the most important issues to develop next-generation multilayer microdevices. In this work, the tetragonal 0.4Ba(Zr_0.2Ti_0.8)O₃–0.6(Ba_0.7Ca_0.3)TiO₃ (BZT–60BCT) ceramics with a wide grain size from 2.1 to 24 μm were successfully prepared by using ultrafine nano powder and two-step sintering. The results demonstrate that critical/intermediate grain size of dielectric constant ε_r and piezoelectric constant d₃₃ appears at ∼12.9 μm. It was found that the presence of large lattice tetragonality, and enhanced domain wall motion induced by domain coexistence between submicron and nano size in sample with a grain size of ∼12.9 μm, resulting in the superior dielectric and piezoelectric properties. These findings and analyses of the origin of superior dielectric and piezoelectric properties at intermediate grain size have important practical implications in the design of high-performance piezoelectric ceramics.     

Evaluation of polyphosphoric acid on the performance of polymer modified asphalt binders

The aim of this research is to evaluate the effect of polyphosphoric acid (PPA) on the mechanical performance of styrene–butadiene–styrene (SBS) and styrene–butadiene–rubber (SBR) modified asphalt. Conventional properties, multiple stress creep recovery (MSCR), bending beam rheometer (BBR), and linear amplitude sweep (LAS) tests were conducted to evaluate the performance characteristics of asphalt at different PPA inclusions. Gel-permeation chromatography (GPC), saturates, aromatics, resins, and asphaltenes (SARA), and Fourier transform infrared (FTIR) were carried to reveal the molecular weight, component and infrared spectra of asphalt. Results showed that PPA hardened the asphalt, improved the rutting and fatigue performances of polymer modified asphalt (PMA) binder, but weakened the anti-cracking performances. Besides, storage stability had a significant improvement as the addition of PPA. The addition of PPA brought more macromolecules into asphalt and led to more high-average molecular weight compounds. Furthermore, PPA changed four component ratios of asphalt. Both PMA with or without PPA have similar absorption peaks. This may be due to absorption peak of PMA covered the changes in PPA modification process as the low content of PPA. 0.8% dosage of PPA may be considered optimum for composite modified binder combining the above experimental results for this binder source.     

Enhanced microwave absorption and electromagnetic shielding property of (1-x)K0.5Na0.5NbO3 ~ xAl2O3 nano-ceramics

(1-x) K_0.5Na_0.5NbO₃ ~ xAl₂O₃ (x = 0, 0.2, 0.4, 0.6) ceramics were prepared via a traditional solid-state reaction method. The phase structure, micro-morphology, dielectric properties and electromagnetic properties of ceramic samples were studied and analyzed. Results indicate that all the samples are similar to K_0.5Na_0.5NbO₃ (KNN) in perovskite structure. With the increase of Al₂O₃ content, the X-ray diffraction peaks move to a large angle region, suggesting the substitution of niobium ions by aluminium ions and the distortion of the KNN lattice with a new phase arising. With the increase of Al₂O₃ content the grain size reduces and the dielectric constant decrease, yielding to the decrease of the electromagnetic shielding performance of ceramic. When the x is 0.4, the minimum value of reflectivity of sample is −28 dB at the frequency of 11.6 GHz. It can be concluded that both the grain size and Al₂O₃ content can obviously affect the electromagnetic properties of ceramics, which can be easily turned through a multi-layer SiO₂ heterojunction structure.     

The relationship between enhanced dielectric property and structural distortion in Ca doped Ba2NaNb5O15 tungsten bronze ceramics

The relationship between enhanced dielectric property and structural distortion in tungsten bronze structure ceramics was discussed in this work. The ceramics with the composition of (Ba_1-xCa_x)₂NaNb₅O₁₅ (x = 0, 0.1, 0.2, 0.3, 0.4) were fabricated via conventional solid-state method. All ceramics were pure without secondary phase and the distinct lattice distortion in structure was testified by Rietveld XRD refinement. Compared with the un-doped composition, the maximum polarization and energy storage density were strongly enhanced according to the ferroelectric property measurements, which were contributed to the distortion of NbO₆ octahedron induced by the variation of ionic radius. The actually pulsed charge-discharge property of x = 0.3 ceramic was tested, whist excellent power density (P_D = 35.106 MV/cm³) and discharge energy density (W_d = 0.29 J/cm³) were obtained at 100 °C under 120 kV/cm, revealing the potential for application of Ba₂NaNb₅O₁₅ system-based ceramics in harsh environment.     

Optical properties and conductivity of PEDOT:PSS films treated by polyethylenimine solution for organic solar cells

We report on conductivity and optical property of three different types of poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) films [pristine PH1000 film (PH1000-p), with 5 wt.% ethylene glycol additive (PH1000-EG) and with sulfuric acid post-treatment (PH1000-SA)] before and after polyethylenimine (PEI) treatment. The PEI is found to decrease the conductivity of all the PEDOT:PSS films. The processing solvent of 2-methoxyethanol is found to significantly enhance the conductivity of PH1000-p from 1.1 up to 744 S/cm while the processing solvent of isopropanol or water does not change the conductivity of PH1000-p much. As for the optical properties, the PEI treatment slightly changes the transmittance and reflectance of PH1000-p and PH1000-EG films, while the PEI leads to an substantial increase of the absorptance in the spectral region of 400–1100 nm of the PH1000-SA films. Though the optical property and conductivity of the three different types of PEDOT:PSS films vary with the PEI treatment, the treated PEDOT:PSS films exhibit similar low work function. We demonstrate solar cells with a simple device structure of glass/low-WF PEDOT:PSS/P3HT:ICBA/high-WF PEDOT:PSS cells that exhibit good performance with open-circuit voltage of 0.82 V and fill factor up to 0.62 under 100 mW/cm² white light illumination.     

Effect of aluminum on microstructure,mechanical properties and pitting corrosion resistance of ultra-pure 429 ferritic stainless steels

Effect of aluminum on microstructure, mechanical properties and pitting corrosion resistance of ultra-pure 429 ferritic stainless steels has been investigated. Aluminum can significantly increase the ratio of equiaxed crystal grains, but the promotion effect has great relation with aluminum content. Aluminum can stabilize ferrite phase and significantly reduce recrystallization temperature. Increased aluminum content can also lead to the precipitate of AlN and Al₂O₃ at higher temperature. The increased amount of AlN may partly contribute to the reduced nitrogen element to form austenite at high temperature, hence the high temperature phase transformation of α + γ → α occurs. The fine and large number of Al₂O₃ particles can refine grain size and then promote recrystallization. The highest intensity of γ-fiber texture {1 1 1}〈1 1 2〉 is observed in the steel with 0.19 wt.% aluminum, which can improve the formability of steels. With the increase of aluminum content, the tensile strength increases linearly but the elongation and plastic strain ratio first increase then decrease, the working hardening index varies slightly among the steels. Appearance of Al₂O₃ inclusions with small size and decreased content of MnS benefit pitting corrosion resistance. However, the large dimension Al₂O₃ inclusions have significantly negative influence on pitting corrosion resistance.     

孪尾疏水单体改性聚丙烯酰胺的合成及性能表征

以十二烷基磺酸钠胶束溶液为表面活性剂,将孪尾疏水单体N,N-二乙基丙烯酰胺增溶其中,再以过硫酸钾为引发剂,与丙烯酰胺和丙烯酸钠通过胶束共聚法制备了疏水改性聚丙烯酰胺(HMPAM)。利用FTIR、1H NMR、TG、荧光光谱和流变测试等方法表征了HMPAM的结构,并研究了其水溶液的流变性能。表征结果显示,HMPAM中存在孪尾的乙基结构,热稳定性较好。实验结果表明,当HMPAM含量低于0.5 g/L时,其对溶液极性影响不大;当HMPAM含量高于0.5 g/L时,溶液极性降低。HMPAM溶液为非牛顿流体,随HMPAM含量的增大,聚合物的孪尾基团发生缔合作用的几率增大,溶液表观黏度增大。HMPAM具有较好的触变性和耐温性能。     

Influence of Bridgman solidification on microstructures and magnetic behaviors of a non-equiatomic FeCoNiAlSi high-entropy alloy

The non-equiatomic FeCoNiAlSi alloy is prepared by the Bridgman solidification (BS) technique at different withdrawal velocities (V = 30, 100, and 200 μm/s). Various characterization techniques have been used to study the microstructure and crystal orientation. The morphological evolutions accompanying the crystal growth of the alloy prepared at different withdrawal velocities are nearly the same, from equiaxed grains to columnar crystals. The transition of coercivity is closely related to the local microstructure, while the saturation magnetization changes little at different sites. The coercivity can be significantly reduced from the equiaxed grain area to the columnar crystal area when the applied magnetic field direction is parallel to the crystal growth direction, no matter what is the withdrawal velocity. In addition, the alloy possesses magnetic anisotropy when the applied magnetic field is in different directions.     

黑色着色剂在湿法涂层中的应用研究

采用含黑色着色剂的涂层浆对尼龙6织物进行湿法涂层,通过测定着色剂在涂层浆中的稳定性及着色剂对涂层织物的着色性和色牢度等性能,研究了黑色着色剂种类、着色剂复配比例及用量、分散剂种类及用量对湿法涂层性能的影响。试验结果表明:炭黑301和中性染料S-RR在湿法涂层中的应用性能较好,并对其进行复配研究,确定中性染料S-RR和炭黑301的复配比例为3∶1,用量为8g;分散剂为TS100,用量为1.0g。